Changed wallpaper Windows7 Starter pack

2011-10-23T18:40:00.000-07:00

Windows 7 Starter makes netbooks easier to use because it puts less between you and what you want to do—less waiting, less clicking, less hassle connecting to networks. Windows 7 Starter combines the latest in reliability and responsiveness with the familiarity and compatibility of Windows. (windows microsoft.com)
Continue reading HERE for change wallpaper for windows7 starter pack.

Windows XP | Improve Shutdown Speed

2010-06-11T07:50:00.000-07:00

This tweak reduces the time XP waits before automatically closing any running
programs when you give it the command to shutdown.
Go to Start then select Run
Type 'Regedit' and click ok
Find 'HKEY_CURRENT_USER\Control Panel\Desktop\'
Select 'WaitToKillAppTimeout'
Right click and select 'Modify'
Change the value to '1000'
Click 'OK'
Now select 'HungAppTimeout'
Right click and select 'Modify'
Change the value to '1000'
Click 'OK'

Now find 'HKEY_USERS\.DEFAULT\Control Panel\Desktop'
Select 'WaitToKillAppTimeout'
Right click and select 'Modify'
Change the value to '1000'
Click 'OK'
Now find 'HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\'
Select 'WaitToKillServiceTimeout'
Right click and select 'Modify'
Change the value to '1000'
Click 'OK'

source: http://hack2007.50webs.com

Speed up menu display

2010-01-15T10:52:00.000-08:00

When using the start menu the you will notice a delay between different tiers of the menu hierarchy. For the fastest computer experience possible I recommend changing this value to zero. This will allow the different tiers to appear instantly.

Start Regedit. If you are unfamiliar with regedit please refer to our FAQ on how to get started.
Navigate to HKEY_CURRENT_USER\Control Panel\Desktop
Select MenuShowDelay from the list on the right.
Right on it and select Modify.
Change the value to 0
Reboot your computer.

Remove shortcut arrow from desktop icons

2010-01-14T08:29:00.000-08:00

Open Regedit(Start- Run- Regedit)
Navigate to HKEY_LOCAL_MACHINE SOFTWARE Microsoft Windows CurrentVersion Explorer My Computer NameSpace DelegateFolders There will see a sub-key named {59031a47-3f72-44a7-89c5-5595fe6b30ee}. By Deleting this you can remove the 'Other Files stored on This Computer' group.

How to Back Up the Registry

2010-01-13T10:56:00.000-08:00

Before you edit the registry, export the keys in the registry that you plan to edit, or back up the whole registry. If a problem occurs, you can then follow the steps how-to restore the registry to its previous state.

How to Export Registry Keys

Click Start, and then click Run.

In the Open box, type regedit, and then click OK.

On the File menu, click Export.

In the Save in box, select the boxs at the bottom the bottom according to weather you want to export all or only selected branches of the registry.

Next select a location in which to save the backup .reg file. In the File name box, type a file name, and then click Save.

To restore registry keys that you exported, double-click the .reg file that you saved.

HIDE "USER ACCOUNTS" FROM USERS

2010-01-13T08:09:00.000-08:00

Go to Start/Run, and type:

GPEDIT.MSC

Open the path

Double Click User Configuration > Administrative Templates > Control Panel

Double Click "Hide specified Control Panel applets"

Put a dot in 'enabled', then click 'Show"

Click Add button,

Type "nusrmgt.cpl" into the add box

Click Ok.

How to install and use the Recovery Console in Windows XP

2010-01-12T08:43:00.000-08:00

How to install the Recovery Console

You can install the Recovery Console on your computer to make it available if you cannot restart Windows. You can then select the Recovery Console option from the list of available operating systems during startup. Install the Recovery Console on important servers and on the workstations of IT personnel. This article describes how to install the Recovery Console to your Microsoft Windows XP-based computer. To install the Recovery Console, you must be logged on as an administrator.
Although you can run the Recovery Console by starting directly from the Windows XP CD, it is generally more convenient to set it up as a startup option on your startup menu. To run the Recover Console directly from the CD, see the "How to use the Recovery Console" section.

To install the Recovery Console, follow these steps:

Insert the Windows XP CD into the CD-ROM drive.
Click Start, and then click Run.
In the Open box, type d:\i386\winnt32.exe /cmdcons where d is the drive letter for the CD-ROM drive. In the case of 'Microsoft Windows XP Professional x64 Edition, type d:\amd64\winnt32.exe /cmdcons where d is the drive letter for the CD-ROM drive.
A Windows Setup Dialog Box appears. The Windows Setup Dialog Box describes the Recovery Console option. To confirm the installation, click Yes.
Restart the computer. The next time that you start your computer, "Microsoft Windows Recovery Console" appears on the startup menu.

How to use the Recovery Console

You can enable and disable services, format drives, read and write data on a local drive (including drives that are formatted to use the NTFS file system), and perform many other administrative tasks. The Recovery Console is particularly useful if you have to repair your computer by copying a file from a disk or CD-ROM to your hard disk, or if you have to reconfigure a service that is preventing your computer from starting correctly.

If you cannot start your computer, you can run the Recovery Console from the Microsoft Windows XP startup disks or the Windows XP CD-ROM. This article describes how to perform this task.

After Windows XP is installed on your computer, to start the computer and use the Recovery Console you require the Windows XP startup disks or the Windows XP CD-ROM.

For more information about how to create Startup disks for Windows XP (they are not included with Windows XP), click the following article number to view the article in the Microsoft Knowledge Base:

310994 (http://support.microsoft.com/kb/310994/ ) Obtaining Windows XP Setup boot disks

Note To start the computer from the Windows XP CD-ROM, you must configure the basic input/output system (BIOS) of the computer to start from your CD-ROM drive.

To run the Recovery Console from the Windows XP startup disks or the Windows XP CD-ROM, follow these steps:

Insert the Windows XP startup disk into the floppy disk drive, or insert the Windows XP CD-ROM into the CD-ROM drive, and then restart the computer.

Click to select any options that are required to start the computer from the CD-ROM drive if you are prompted.
When the "Welcome to Setup" screen appears, press R to start the Recovery Console.
If you have a dual-boot or multiple-boot computer, select the installation that you must access from the Recovery Console.
When you are prompted, type the Administrator password. If the administrator password is blank, just press ENTER.
At the command prompt, type the appropriate commands to diagnose and repair your Windows XP installation.

For a list of commands that are available in Recovery Console, type recovery console commands or help at the command prompt, and then press ENTER.

For information about a specific command, type help commandname at the command prompt, and then press ENTER.
To exit the Recovery Console and restart the computer, type exit at the command prompt, and then press ENTER.

How to use the Recovery Console command prompt

When you use the Recovery Console, you are working at a special command prompt instead of the ordinary Windows command prompt. The Recovery Console has its own command interpreter. To enter this command interpreter, you are prompted by Recovery Console to type the local Administrator password.

When the Recovery Console starts, you can press F6 to install a third-party SCSI or RAID driver, in case you need such a driver to access the hard disk. This prompt works the same as it does during installation of the operating system.

The Recovery Console takes several seconds to start. When the Recovery Console menu appears, a numbered list of the Windows installations on the computer appears. (Generally, only c:\Windows exists.) Press a number before you press ENTER, even when only one entry appears. If you press ENTER without selecting a number, the computer restarts and begins the process again.

When you see the prompt for %SystemRoot% (generally C:\Windows), you can start using the available commands for the Recovery Console.

Command actions

The following list describes the available commands for the Recovery Console:

Attrib changes attributes on one file or subdirectory.
Batch executes commands that you specify in the text file, Inputfile. Outputfile holds the output of the commands. If you omit the Outputfile parameter, output appears on the screen.
Bootcfg modifies the Boot.ini file for boot configuration and recovery.
CD (Chdir) operates only in the system directories of the current Windows installation, removable media, the root directory of any hard disk partition, or the local installation sources.
Chkdsk The /p switch runs Chkdsk even if the drive is not flagged as dirty. The /r switch locates bad sectors and recovers readable information. This switch implies /p. Chkdsk requires Autochk. Chkdsk automatically looks for Autochk.exe in the startup folder. If Chkdsk cannot find the file in the startup folder, it looks for the Windows 2000 Setup CD-ROM. If Chkdsk cannot find the installation CD-ROM, Chkdsk prompts the user for the location of Autochk.exe.
Cls clears the screen.
Copy copies one file to a target location. By default, the target cannot be removable media, and you cannot use wildcard characters. Copying a compressed file from the Windows 2000 Setup CD-ROM automatically decompresses the file.
Del (Delete) deletes one file. Operates within the system directories of the current Windows installation, removable media, the root directory of any hard disk partition, or the local installation sources. By default, you cannot use wildcard characters.
Dir displays a list of all files, including hidden and system files.
Disable disables a Windows system service or driver. The variable service_or_driver is the name of the service or driver that you want to disable. When you use this command to disable a service, the command displays the service's original startup type before it changes the type to SERVICE_DISABLED. Note the original startup type so that you can use the enable command to restart the service.
Diskpart manages partitions on hard disk volumes. The /add option creates a new partition. The /delete option deletes an existing partition. The variable device is the device name for a new partition (such as \device\harddisk0). The variable drive is the drive letter for a partition that you are deleting (for example, D). Partition is the partition-based name for a partition that you are deleting, (for example: \device\harddisk0\partition1) and can be used instead of the drive variable. The variable size is the size, in megabytes, of a new partition.
Enable enables a Windows system service or driver. The variable service_or_driver is the name of the service or driver that you want to enable, and start_type is the startup type for an enabled service. The startup type uses one of the following formats:

SERVICE_BOOT_START
SERVICE_SYSTEM_START
SERVICE_AUTO_START
SERVICE_DEMAND_START
Exit quits the Recovery Console, and then restarts the computer.
Expand expands a compressed file. The variable source is the file that you want to expand. By default, you cannot use wildcard characters. The variable destination is the directory for the new file. By default, the destination cannot be removable media and cannot be read-only. You can use the attrib command to remove the read-only attribute from the destination directory. The option /f:filespec is required if the source contains more than one file. This option permits wildcard characters. The /y switch disables the overwrite confirmation prompt. The /d switch specifies that the files will not be expanded and displays a directory of the files in the source.
Fixboot writes a new startup sector on the system partition.
Fixmbr repairs the startup partition's master boot code. The variable device is an optional name that specifies the device that requires a new Master Boot Record. Omit this variable when the target is the startup device.
Format formats a disk. The /q switch performs a quick format. The /fs switch specifies the file system.
Help If you do not use the command variable to specify a command, help lists all the commands that the Recovery Console supports.
Listsvc displays all available services and drivers on the computer.
Logon displays detected installations of Windows and requests the local Administrator password for those installations. Use this command to move to another installation or subdirectory.
Map displays currently active device mappings. Include the arc option to specify the use of Advanced RISC Computing (ARC) paths (the format for Boot.ini) instead of Windows device paths.
MD (Mkdir) operates only within the system directories of the current Windows installation, removable media, the root directory of any hard disk partition, or the local installation sources.
More/Type displays the specified text file on screen.
Rd (Rmdir) operates only within the system directories of the current Windows installation, removable media, the root directory of any hard disk partition, or the local installation sources.
Ren (Rename) operates only within the system directories of the current Windows installation, removable media, the root directory of any hard disk partition, or the local installation sources. You cannot specify a new drive or path as the target.
Set displays and sets the Recovery Console environment variables.
Systemroot sets the current directory to %SystemRoot%.

Recovery Console rules

Several environment rules are in effect while you are working in the Recovery Console. Type set to see the current environment. By default, these are the rules:

AllowAllPaths = FALSE prevents access to directories and subdirectories outside the system installation that you selected when you entered the Recovery Console.
AllowRemovableMedia = FALSE prevents access to removable media as a target for copied files.
AllowWildCards = FALSE prevents wildcard support for commands such as copy and del.
NoCopyPrompt = FALSE means that you are prompted by the Recovery Console for confirmation when overwriting an existing file.

How to delete the Recovery Console

To delete the Recovery Console:

Restart your computer, click Start, click My Computer, and then double-click the hard disk where you installed the Recovery Console.
On the Tools menu, click Folder Options, and then click the View tab.
Click Show hidden files and folders, click to clear the Hide protected operating system files check box, and then click OK.
At the root folder, delete the Cmdcons folder and the Cmldr file.
At the root folder, right-click the Boot.ini file, and then click Properties.
Click to clear the Read-only check box, and then click OK.

Warning: Modifying the Boot.ini file incorrectly may prevent your computer from restarting. Make sure that you delete only the entry for the Recovery Console. Also, change the attribute for the Boot.ini file back to a read-only state after you finish this procedure. Open the Boot.ini file in Microsoft Windows Notepad, and remove the entry for the Recovery Console. It looks similar to this:

C:\cmdcons\bootsect.dat="Microsoft Windows Recovery Console" /cmdcons
Save the file and close it.

How to install Recovery Console during an unattended installation

To install the Recovery Console during the unattended installation of Windows, you must use the [GuiRunOnce] section of the unattend.txt file.

Command1="path\winnt32 /cmdcons /unattend"

For more information about how to use the Unattend.txt file, see the Deployment Planning Guide of the Windows 2000 Server Resource Kit.

MY COMPUTER TIPS